Download Reports from SmartTouch Control Panels
Presented by Bryan Willis
Need a record of your oven temperatures? Bryan Willis, Controls Manager at RTT Finishing Solutions, shows how to export thermocouple data from the SmartTouch control panel to a USB thumb drive. You can then open it in Excel to review the time, date and temperature recorded by each probe.
Video Chapters
- 0:00 Introduction
- 0:11 What you’ll need
- 0:25 Connecting the USB drive
- 0:42 Navigating to Temperature History
- 0:50 Exporting the report to USB
- 1:04 Viewing the data on your computer
Video Transcript
Hi, I’m Bryan Willis, Controls Manager at RTT Finishing Solutions. In this video, I’ll show you how to export data from your SmartTouch control panel so you can view and store it on your computer.
What you’ll need
You’ll need a USB thumb drive. A 2–8 GB drive works best. Larger drives can cause problems with the screen. This one is about 4 GB.
Exporting the report
- Plug the thumb drive into the back of the screen.
- A pop-up will appear. Close it, since we’re saving data to the drive, not pulling anything from it.
- Go to the Maintenance tab, then Temperature History.
- Select Monitoring Thermocouples.
- Tap Export to USB. The data light will turn on.
- When the data light turns off, remove the thumb drive.
Additional Resources
Spray Booth Recipe Setup
Presented by Bryan Willis
Learn how to program a cure recipe on your spray booth AMU control panel, including spray, flash, cure and cool set points, saving your changes and activating the recipe before curing.
Spray Booth Sizing and Selection
Presented by John Owed
A practical guide to spray booth sizing and selection: why booths are required, how to calculate airflow, when to choose crossdraft or downdraft, and which upgrades improve performance.
Proper Use and Measurement of a Manometer
Presented by Cayce Carr and Trey Peavy
A step-by-step guide to installing the Dwyer Mark II manometer on your spray booth exhaust chamber: mounting, leveling, filling with gauge fluid, zeroing and connecting the pressure ports.
Spray Booth Inspection for Compliance
Presented by John Owed
Avoid costly spray booth citations. Discover common compliance issues, including blocked manometers, missing fire suppression, unsafe spray areas and poor shop housekeeping.
Monitor Part Temperature with Smartbatch
Presented by Bryan Willis
Cure to part temperature, not air temperature. SmartBatch technology displays real-time part temperatures, starts the cure timer automatically and exports or emails a full cycle record.
Successful Spray Booth Installations
Presented by Chris Schoch
Avoid costly spray booth installation surprises. We cover the project flow from quote to install, plus real-world lessons on field conditions, ductwork, air makeup units, filtration and ovens.
Not Sure Which System You Need?
Get a system built around your application, with the right airflow, filtration, and fit for your facility.
